Dual Laser Cutting Machine Bielda M 3015T, Protection Housing, Raycus/IPG Laser Source, Board Chassis, Aluminium Cross Beam
Maximum rolling speed120m/min
Maximum acceleration speed2.0G
|Chassis||Robust welded plates|
|Beam||Aluminium, light and precise|
|Transmission system||Precision unit with rack and pinion mechanism|
|Machine type||Open system with interchangeable tables|
|Speed reducer||French Motoreducer|
|Engine and driver||Japan FUJI servo motor|
|Guiding rails||Taiwan HIWIN|
|Rack and pinion||Taiwan YYC|
|Laser cap||Ray Tools with auto focus|
|Gas valve||Taiwan Airtac|
|Water cooler||China HANLI|
|Proportional electric valve||Japan SMC|
|Dust and mist removal system||Exhaust with centrifugal fan|
|Spare parts||10 nozzles; 6 protective lenses|
|X/Y axis positioning accuracy||±0.03mm|
|X/Y axis repeat positioning accuracy||±0.02mm|
|Maximum rolling speed||120m/min|
|Maximum acceleration speed||2.0G|
|Maximum load on the worktable||800 kg|
|Time change tables||25s|
|Pipe cutting system specifications||Round pipe: Φ20-Φ220mm / Square pipe: Φ20-Φ150mm Rectangular pipe: circumscribed circle diameter≤220mm|
|Power supply||Three-phase, 380V, 50Hz|
The chassis is made of thick metal plates welded and then heat treated so it becomes stronger, harder to deform and has a longer life.
Made of cast aluminium, ensures high precision and very good stability
Suitable for cursor observation, facilitates heat dissipation, easy access for cleaning and maintenance, prevents burning of air passages
Combined upper and lower partitioned drain system
The Bielda laser machine adopts the CypCut control system, featuring intelligent diagnostics, multi-process operation, three-stage drilling, functional laser control, adaptive workpiece side search, automatic corner deceleration, flycut, interchangeable worktable, mechanical compensation, accuracy.
During oxygen cutting, the material is heated to melting temperature by the laser beam using gas pressures between 0.4 and 10 bar. This process is used to cut OL sheets. With thicknesses between 0.8mm and 30mm
Depending on the material and its quality, different industrial gases are used at different pressures, chosen according to the cutting speed and the quality selected for it.
Cutting with Bielda laser machines is extremely precise. In addition to sheet materials, pipes and metal tubes can be cut with our laser machines.
Black sheet, pickled, galvanized or stainless steel sheet, aluminium or other non-ferrous materials with thicknesses from 0.8mm to 30mm can be successfully cut without further processing. Depending on the material and its quality, different industrial gases are used at different pressures, chosen according to the cutting speed and quality selected for it.
Nitrogen cutting is a fusion cutting process resulting in a high precision cut that does not require further machining. The gas is used at pressures up to 20 bar. This process is used to cut galvanized, stainless steel and other non-ferrous metals. Cutting with laser technology has a very low thermal impact on thin materials, which can be cut without the need for any other mechanical operations during a technological process, or before painting.
The cutting process itself, compared to traditional solutions, is clean and has very little impact on the environment, or the human factor. The ventilation and air filtration solutions offered make it easy to install this equipment even in the busiest of environments. The user interface and working with the machine is optimised for maximum ergonomics and efficiency.Multiple supported CAD formats as well as the possibility to perform saves, corrections or even complex drawings from scratch directly on the machine interface support maximum production efficiency.
Importing, saving and exporting files is also facilitated by the possibility of integrating the machine into the user LAN, the machine accepting formats from all established CAD programs: .dxf , dwg, Ai, AutoCad, Corel Draw. The solutions offered by the machine software make the operator’s work as easy as possible, by generating nesting plans, predefined settings, ergonomically organised layout.
The possibility to generate common sides in the serial drawings offers a short cutting time and maximum efficiency of the whole process.
|CONSUMABLES||ESTIMATED TIME OF USE|
|Protective glass||500 hours|
|Ceramic ring||4000 hours|
|Focus lens||4000 hours|
Users can graphically view real-time data dynamics via the browser, allowing remote diagnosis and maintenance of equipment. Users can use mobile phones, PDAs and other devices for real-time display of the monitoring interface and text mode to change data values, acknowledge alerts and so on.
The system has the function of an “expert system” to perform/assist product positioning, flow tracking tracking interrogation, remote fault diagnosis and interrogation of stored equipment fault data. Data is transmitted to the client, other monitoring points and the server via the Internet/5G network.
In CLOUD it intelligently collects equipment status and failure information for analysis, calculates production cost and maintenance costs according to a certain algorithm and obtains a high quality cost performance scheme of the product design, which saves production costs for the enterprise.
The CLOUD has multiple functions such as remote diagnostics and maintenance, redundancy, real-time historical data recording, scheduling, formulation, video and audio functions. It has a multitude of ere manager options and scrinting functions, establishes connections with many standardized interfaces and can efficiently connect with the plants MES system. With the advent of the 5G era, the CLOUD will combine laser equipment and artificial intelligence with 5G technology and will be widely used in cloud computing, big data and edge computing. It will make advanced technology and complex laser equipment much and easier to use, and provide customers with faster global remote diagnostic services.