Guillotine BS, Pivoting Beams, 25 Cutting Strokes/min, 2 Speeds

General specifications

Two-speed system
Model S

CNC controller with touchscreen
Optional equipment

MotoCut©

Guillotine developed with pivoting beams working at 25 cutting strokes per minute;
Two-speed system cuts thin sheets up to 50% faster;
The low speed mode offers precise cutting for thick material;
High cutting quality, machine concept, low cutting angle design;
Fixed angle construction feature;
Automatic adjustment of blade distance and stroke by the CNC controller, according to customer request;
Rigid body concept designed to prevent deflection;
1000 mm rear track gauge travel;
Rigid rear track, precision linear spindle, no backlash guide;
The programmable rear track has 0.1 mm positioning tolerance and retraction characteristics;
Automatic rear track lift function;
1000 mm to easily feed longer sheets.

ELGO P40T

Cybelec Touch 8

CNC controller with touchscreen
Easy blade gap adjustment system for precise cutting and long-life blades;
Mobile rotating control arm;
Roller bearing table to help feed sheets to the machine through easy operation and prevents sheet scuffing;
One-piece, heavy steel frame, structurally rigid steel, produced with modern manufacturing methods;
CNC-controlled, automatic motorised gauge, 1000 mm range (stroke) with ball shaft and guide system;
CNC programmable back gauge features with retract and swing features for longer sheets;
Hydraulic sheet clamping system that holds the sheet in place during the cutting process;
Hydraulic cylinders machined as required from solid solid material;
Hydraulic pistons machined from forged steel, hardened, ground and chrome plated;
Manual blade distance adjustment system;
Adjustable blade base holder;
Two-speed machine concept;
Front finger protection open 1000 mm;
Short stroke mode with CNC control, stroke numbering for short cutting efficiency;
High quality alloy lower and upper blade for long life;
Lower blade 4 edges, upper blade 2 edges;
Maintenance-free ball joint system;
Low maintenance Hoerbiger or Bosch Rexroth hydraulic block;
Electrical components Schneider- Siemens etc., with ventilated electrical cabinet;
Stand type pedal suitable for serial cutting operations and blade adjustment;
1000 mm front support arms with ladder and t-slot tipping stops;
Protective covers for the back and sides;
Rear light system, category 4, CE compliant;
Cutting line with light beam;
Oil tank level indicator;
Complete electrical switching and control panel for 400V AC three-phase 50Hz.

MotoCut© (blade offset, stroke) optional, automatic stroke, blade distance adjustment
Motorized by CNC;
Adjustable angle gauge for cutting angular workpieces 0-180 degrees;
Front finger protection 1000 mm;
Longer front support arms;
Special 500 mm rope;
Operator protection with light beam, category 4, CE compliant;
Special blade for stainless steel type cutting material;

Automatic swing gauge after 1000 sheets of board

(Standard equipment)

Protection with 1000 mm opening

(Standard equipment)

Blade gap adjustment system

(Standard equipment)

Rear protection light beams

(Standard equipment)

Pneumatic sheet support system

(Optional equipment)

Lever

(Standard equipment)

Pneumatic system depending on the sheet

(Optional equipment)

CNC front brackets

(Optional equipment)

Sistem automat. Motocut de decalaj lama

(Optional equipment)

Sistem transport și stivuire

(Optional equipment)

Guillotine model S		S06 2100	S06 3100	S10 3100	S13 3100	S16 3100	S06 4100	S10 4100	S13 4100	S16 4100	S20 4100
Cutting capacity (420N/mm2)		6	6	10	13	16	6	10	13	16	20	mm
Cutting capacity (700N/mm2)		4	4	6	8	10	4	6	8	10	13	mm
Cutting length	A	2000	3000	300	3000	3000	4000	4000	4000	4000	4000	mm
Cutting angle		1,5	1,5	2	2,1	2,2	1,5	1,5	1,8	2	2	degrees
Pressing cylinder		9	12	14	14	17	18	17	17	18	18	units
Stroke speed per minute (min-max)		12/23	18/23	13/19	10/14	7/10	10/14	11/17	9/15	5/16	4/15	1/min
Table length	R	2330	3230	3240	3240	3290	4230	4240	4320	4375	4390	mm
Table height	C	850	855	850	860	850	850	865	915	900	960	mm
Table width	B	500	500	600	620	625	600	630	660	680	710	mm
Lever depth	D	250	250	2580	250	200	250	250	250	150	150	mm
Travel distance trear wheel drive		1000	1000	1000	1000	1000	1000	1000	1000	1000	1000	mm
Machine length	L	3300	4300	4350	4400	4450	5340	5370	5450	5480	5700	mm
Machine height	H	1850	1850	2200	2400	2400	2150	2380	2400	2420	2850	mm
Machine width	W	2620	2600	3100	3150	3250	2900	3000	3000	3100	3150	mm
Machine width (W1)	W1	1800	1800	2000	2000	2200	2000	2100	2200	2300	2300	mm
Oil tank capacity		160	160	230	230	315	220	280	370	370	370	litres
Engine power		11	11	22	22	30	11	22	30	30	45	kW
Approximate weight		5	6	9	11	16,5	10,2	16,5	19	23	27	Tons
*Technical specifications are subject to change without prior notice. Machines can be produced according to customer requirements.

Request a quote for

Guillotine BS, Pivoting Beams, 25 Cutting Strokes/min, 2 Speeds

Name *

Fill in name

Email *

Fill in email

Phone *

Fill in phone number

City *

Fill in city

County *

Fill in county

Observations *

Fill in message

I agree to the processing of personal data and to the terms and conditions. *

Field is mandatory

Main Menu

Guillotine BS, Pivoting Beams, 25 Cutting Strokes/min, 2 Speeds